Enabling Automatic Dect System Selection - Nortel 4075 User Manual

DECT system configuration

Enabling automatic DECT system selection

If you subscribe the handset to more than one DECT system, you can
configure your handset to automatically select the system to which it
connects.
If Automatic selection is enabled, when the handset moves out of range of
the current system, it automatically attempts to connect and log on to
another available (subscribed) DECT system.
To enable automatic selection of a DECT system, perform the following
steps:
Network select
Select
Auto. select
Select
50
1. Open the Connectivity
"Accessing the Connectivity menu" (page
2. Press the Up
select option.
3. Press the Select
4. Highlight Auto.
5. Press the Select
The name of the currently active system highlights.
6. Press the Clr
idle display.
menu using the steps in
or Down key to highlight the
soft key.
select.
soft key.
key one or more times to return to the
46).
Network