Nortel 4075 User Manual page 232

Handset accessories
Search for devices
Pair
Connect
Connecting and disconnecting a paired Bluetooth wireless
technology headset
Once you have added a Bluetooth wireless technology headset, the
headset automatically connects to the DECT Handset when the two
devices are active, and are in range of each other. The DECT Handset
disconnects the Bluetooth wireless technology headset if the handset is
inactive or out-of-range.
To manually connect or disconnect a Bluetooth wireless technology
handset, perform the following steps:
Bluetooth
232
4. Press the Up
for devices option.
Attention: If the search process is successful,
proceed to step 5. If the search is unsuccessful,
repeat steps 3 to 4.
5. Press the Pair
6. Use the Dialpad
Bluetooth wireless technology headset (see the
headset documentation).
7. Press the Connect
8. Press the Clr
idle display.
1. Open the Bluetooth
steps in "Accessing the Bluetooth wireless
technology configuration menu" (page
or Down key to highlight the
soft key and add the headset.
to enter the PIN code of your
soft key to connect the device.
key one or more times to return to the
configuration menu using the
Search
229).