Enabling the Vibrator
Attention: The Vibrator feature is available on the DECT 4070 and
4075 Handsets only.
If you enable the Vibrator feature, the handset vibrates to alert you about
incoming calls. You can configure the handset to vibrate, ring, or both.
To enable the Vibrator feature, perform the following steps:
Vibrator
Select
Off
Vibrate then ring
Vibrate and ring
Select
Enabling the Key sound
If you enable the Key sound feature, a sound occurs when you press a
key.
1. Open the
Sounds and alerts
in
"Accessing the Sounds and alerts menu"
(page
167).
2. Press the
Up
option.
3. Press the
Select
4. Press the
Up
Vibrate then ring,
5. Press the
Select
6. Press the
Clr
idle display.
menu using the steps
or
Down
key to highlight the
soft key.
or
Down
key to select
or
Vibrate and
soft key to apply the changes.
key one or more times to return to the
Telephone settings
Vibrator
Off
(disabled),
ring.
175