Make A Headset Call; Answer A Call - Nortel 2212 User Manual

Make a headset call

To make a call using a headset:

Answer a call

The handset rings or vibrates to alert you to an incoming call. Additionally, a line
number on the display flashes, and the display shows information about the call, such
as the caller's name and extension.
To answer a call:
To answer a call on another line:
To answer a headset call:
Basic handset operation
1. Connect the headset to the headset jack.
2. Follow the steps in "Make a call" on
page 28 to make your call.
Press the Power On/Start Call
Note: While on a call, you hear a soft
beep to indicate another incoming call.
1. If on a call, press the
access the list of functions.
2. Press the number
current call on hold.
3. Press the Line
(DN) feature keys.
4. Press the number key corresponding to
the flashing line number.
When a headset is plugged into the
handset, press any key other than Power
On/Start Call, Power Off/End Call, soft
keys or the side buttons.
key.
Function key to
2 key to place the
key to access the Line
29