Battery - HYOSUNG GD250 Owner's Manual

BATTERY

⊙ I NSPECTION OF BATTERY
SOLUTION LEVEL
The battery is located under the front
seat.
MF (Maintenance Free) battery of airtight
type is used for this motorcycle.
It is not necessary to inspect or
supplement battery fluid.
However, have your dealer check the
c h a r g i n g c o n d i t i o n o f t h e b a t t e r y
periodically.
CAUTION
● Do not remove airtight cover as it is
a permanently sealed type battery.
● Keep separate from the motorcycle
if not used for a long time to reduce
electric discharge and electric
leakage.
● Remove the ⊖ negative terminal
when storing the motorcycle.
WARNING
Never invert the battery cables.
Ensure that the ignition switch is in
position "OFF" before connecting or
disconnecting the battery, otherwise
some components might damage.
⊙ CHECK AND CLEAN OF
BATTERY TERMINAL
Clean the battery terminal when it is dusty
or rusted.
1. Set the ignition switch "OFF" position.
2. Remove the front seat.
3. Check the battery lead wire and terminal.
4. If necessary : disconnect the negative
⊖ battery wire first, then disconnect the
positive ⊕ battery wire.
Remove the battery.
5. Clean the terminal.
If there is white dust, clean it with warm
water.
6. Connect the battery wires and grease the
terminal lightly.
When reinstalling the battery, be sure to
connect the positive ⊕ battery wire first,
then connect the negative ⊖ · battery
wire.
64