BATTERY INITIAL CHARGING
1. BATTERY INITIAL CHARGING
Initial charging of the battery is first charging after filling electrolyte for improvement of the
battery durability.
2. BATTERY INSTALLATION
① Fill the electrolyte to the battery.
② Leave the battery for 30 minutes.
③ Charge the battery by standard charging necessarily.
④ Install the battery to the motorcycle.
~ STANDARD CHARGING TIME
Do not use the battery without the battery initial charging.
Otherwise, the battery may be shortened service life.
The 『 『
Do not permit to start or operate the throttle grip after started without the battery caused
by damage to the electrical system.
Always start or ride these motorcycles with the battery.
: 1.0 A for 10 hours
: 0.8 A for 10 hours ₩
CAUTION
WARNING
』 』 & 『 『
』 』 are started as the battery ignition system.
2