HYOSUNG GD250 Owner's Manual page 85

⊙ FUSE BOX
The fuse box is located under the front
seat.
The fuses are designed to open when the
circuit overload exists in individual electrical
system circuits.
If any electrical system fails to work, then
the fuses must be checked.
● 30A REC. / REG. / IGN fuse protects the
rectifier / regulator and ignition switch
circuits.
● 20A ECU / M.RELAY fuse protects all
electrical circuits including the ECU.
● 10A HEAD L. / METER fuse protects the
head lamp low beam and instrument
panel circuits.
● 10A HEAD H. fuse protects the head
lamp high beam circuits.
● 10A S.STAND / STARTER / CLUTCH
fuse protects the side stand switch,
starter switch and clutch lever switch
circuits.
● 10A POSITION / TAIL / LICEN. / FAN
fuse protects the position lamp, tail lamp,
licence plate lamp and cooling fan
circuits.
● 10A TURN / STOP / HORN / S.SENS
fuse protects the turn signal lamp, brake
lamp, horn and speedo sensor circuits.
● 30A SPARE / 20A SPARE / 10A SPARE
fuse are each spare fuse.
Installing a fuse of incorrect rating or
using aluminum foil or wire instead of a
fuse may seriously damage the
electrical system.
Always replace a blown fuse with a
fuse of the same type and rating. If the
new fuse blows in a short time, consult
your Hyosung dealer or a qualified
mechanic immediately.
84
CAUTION