Dhcp; Dhcp Settings - TP-Link TL-WR1043ND User Manual


Note:
If you want guests visit folders of Guest Network Storage Sharing with guest account, you must
enable Access shared storage with password on the page USB Settings->Storage Sharing, or the
guests can't access to the Guest Network Storage Sharing.
The max share folders number is 6. If you want to share a new folder when the number has
reached 6, you can delete a share folder and then add a new one.
5.6

DHCP

There are three submenus under the DHCP menu: DHCP Settings, DHCP Clients List and
Address Reservation. Click any of them, and you will be able to configure the corresponding
functions.
5.6.1

DHCP Settings

Choose menu "Advanced→DHCP→DHCP Settings", you can configure the DHCP Server.
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PC(s) that are connected to the router on the LAN.
 DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must configure the computer
manually.
 Start IP Address - Specify an IP address for the DHCP Server to start with when
assigning IP addresses. 192.168.0.100 is the default start address.
 End IP Address - Specify an IP address for the DHCP Server to end with when assigning
IP addresses. 192.168.0.199 is the default end address.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-52-