Forwarding; Virtual Servers - TP-Link TL-WR1043ND User Manual

 Disable NAT Control - If disabled, neither NAT function nor forwarding configuration
will take effect.
 Enable Hardware NAT Control - If enabled, the Hardware NAT feature will take effect.
 Disable Hardware NAT Control - If disabled, neither Hardware NAT feature will take
effect.
5.9

Forwarding

There are four submenus under the Forwarding menu: Virtual Servers, Port Triggering, DMZ
and UPnP. Click any of them, and you will be able to configure the corresponding function.
5.9.1

Virtual Servers

Choose menu "Advanced→Forwarding→Virtual Servers", and then you can view and add
virtual servers on this page. Virtual servers can be used for setting up public services on your
LAN. A virtual server is defined as a service port, and all requests from Internet to this service
port will be redirected to the computer specified by the server IP. Any PC that was used for a
virtual server must have a static or reserved IP address because its IP address may change
when using the DHCP function. If you want the Virtual Servers configuration take effect, please
make sure the NAT is enabled.
 Service Port - The numbers of External Service Ports. You can enter a service port or a
range of service ports (the format is XXX – YYY; XXX is the Start port and YYY is the End
port).
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-64-