Dmz; Upnp - TP-Link TL-WR1043ND User Manual

3. When necessary, the external host will be able to connect to the local host using one of
the ports defined in the Incoming Ports field.

Note:
1. When the trigger connection is released, the corresponding opened ports will be closed.
2. Each rule can only be used by one host on the LAN at a time. The trigger connection of
other hosts on the LAN will be refused.
3. Incoming Ports ranges cannot overlap each other.
5.9.3

DMZ

Choose menu "Advanced→Forwarding→DMZ", and then you can view and configure DMZ
host on this page. The DMZ host feature allows one local host to be exposed to the Internet for
a special-purpose service such as Internet gaming or videoconferencing. The router forwards
packets of all services to the DMZ host. Any PC whose port is being forwarded must have its
DHCP client function disabled and should have a new static IP Address assigned to it because
its IP Address may be changed when using the DHCP function.
To assign a computer or server to be a DMZ server:
1. Select the Enable radio button.
2. Enter the IP address of a local PC that is set to be DMZ host in the DMZ Host IP Address
field.
3. Click the Save button.
5.9.4

UPnP

Choose menu "Advanced→Forwarding→UPnP", and then you can view the information about
UPnP on this page. The Universal Plug and Play (UPnP) feature allows the devices, such as
Internet computers, to access the local host resources or devices as needed. UPnP devices
can be automatically discovered by the UPnP service application on the LAN.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-68-