TP-Link TL-WR1043ND User Manual page 21


Note:
If the above screen does not pop-up, it means that your Web-browser has been set to a proxy.
Go to Tools menu > Internet Options > Connections > LAN Settings, in the screen that appears,
cancel the Using Proxy checkbox, and click OK to finish it.
2. After successfully login, you can click the Quick Setup to quickly configure your router.
3. Select the Time Zone, and click Next.
4. Select your WAN Connection Type, or click Auto Detect if you are unsure of what your
connection type is. Click Next and follow the instructions.
The router provides Auto-Detect function and supports five popular ways Dynamic IP,
Static IP, PPPoE, L2TP and PPTP to connect to the Internet. It's recommended that you
make use of the Auto-Detect function. If you are sure of what kind of connection type your
ISP provides, you can select the very type and click Next to go on configuring.
If you select Auto-Detect, the router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the Internet port before detection.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-14-