Network; Wan - TP-Link TL-WR1043ND User Manual
450mbps wireless n gigabit router
Hide thumbs
Also See for TL-WR1043ND:
- User manual (135 pages) ,
- Quick install manual (4 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
5.3
Network
There are four submenus under the Network menu: WAN, MAC Clone, LAN and IPTV. Click any
of them, and you will be able to configure the corresponding function.
5.3.1
WAN
Choose menu "Advanced→Network→WAN", you can configure the IP parameters of the WAN
on the screen below.
1.
If your ISP provides the DHCP service, please choose Dynamic IP type, and the router
will automatically get IP parameters from your ISP.
This page displays the WAN IP parameters assigned dynamically by your ISP, including IP
address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP
parameters from your ISP. Click the Release button to release the IP parameters.
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU Size
unless required by your ISP.
TL-WR1043ND
450Mbps Wireless N Gigabit Router
-27-
Advertisement
Table of Contents
