Specify Dhcp Server Settings - TP-Link Archer GE800 User Manual

Chapter 16
2 ) Check the Wireless Multicast Forwarding
packets will be forwarded automatically. You are recommended to keep it as
default.
3 ) Click SAVE.
4 ) After configuring IGMP proxy, IPTV can work behind your router now. You can
connect your set-top box to any of the router's Ethernet port.
If IGMP is not the technology your ISP applies to provide IPTV service:
1 ) Tick Enable IPTV/VLAN.
2 ) Select the appropriate
• Select Bridge
• Select Custom
3 ) After you have selected a mode, the necessary parameters, including the LAN
port for IPTV connection, are predetermined. If not, select the LAN type to
determine which port is used to support IPTV service.
4 ) Click SAVE.
5 ) Connect the set-top box to the corresponding LAN port which is predetermined
or you have specified in Step 3.
Done!
Your IPTV setup is done now! You may need to configure your set-top box before
enjoying your TV.
16 6

Specify DHCP Server Settings

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and
the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client
Mode according to your ISP.
if your ISP is not listed and no other parameters are required.
if your ISP is not listed but provides necessary parameters.
Customize Your Network Settings
status. When enabled, the multicast
108