Guest Network - TP-Link TL-WR1043ND User Manual

5.5.1

Guest Network

Choose menu "Guest Network → Guest Network", you can configure the Guest Network
Wireless Settings on the page as shown below.

Allow Guest To Access My Local Network - If enabled, guests can communicate with
hosts.

Enable Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth
Control rules will take effect.

Egress Bandwidth For Guest Network - The upload speed through the WAN port for
Guest Network.

Ingress Bandwidth For Guest Network - The download speed through the WAN port for
Guest Network.
 Enable Guest Network – If enabled, the Guest Network function will take effect.

Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.

Wireless Security - You can choose the security type of Guest Network here.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-49-