5.4.4
Wireless MAC Filtering
Choose menu "Advanced→Wireless→Wireless MAC Filtering", you can control the wireless
access by configuring the Wireless MAC Filtering function.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address - The wireless station's MAC address that you want to filter.
Status - The status of this entry, either Enabled or Disabled.
Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or
Modify Wireless MAC Address Filtering entry" page will appear.
To add or modify a MAC Address Filtering entry, follow these instructions:
1.
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-B0-00-0B.
2.
Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3.
Select Enabled or Disabled for this entry on the Status drop-down list.
4.
Click the Save button to save this entry.
TL-WR1043ND
450Mbps Wireless N Gigabit Router
-45-