Wireless Statistics; Guest Network - TP-Link TL-WR1043ND User Manual


Enabled AP Isolation - This function can isolate wireless stations on your network from
each other. Wireless devices will be able to communicate with the router but not with each
other. To use this function, check this box. AP Isolation is disabled by default.

Note:
If you are not familiar with the setting items in this page, it's strongly recommended to keep the
provided default values; otherwise it may result in lower wireless network performance.
5.4.6

Wireless Statistics

Choose menu "Advanced→Wireless→Wireless Statistics", you can see the MAC Address,
Current Status, Received Packets and Sent Packets for each connected wireless station.

MAC Address - The connected wireless station's MAC address

Current Status - The connected wireless station's running status, one of STA-AUTH/
STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/
Disconnected

Received Packets - Packets received by the station

Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go
to the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.
5.5

Guest Network

There are two submenus under the Guest Network menu: Guest Network and Storage
Sharing.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-48-