Guest Network - TP-Link TL-WR1043ND User Manual

4.4

Guest Network

Choosing menu "Basic→Guest Network", you can configure the basic setting for guest
Network.

Allow Guests To Access My Local Network - Click ON/OFF to enable or disable this
feature. If enabled, guests can communicate with hosts.

Wireless - Click ON/OFF to enable or disable your Guest network. If enabled, the wireless
stations will be able to access the Router, otherwise, wireless stations will not be able to
access the Router.

Network Name (SSID) - Create a name (up to 32 characters) for your Guest network. The
same Name (SSID) must be assigned to all wireless devices in your Guest Network.

Password - Create a password for your wireless network. The password must have a
minimum of 8 characters in length.
Click the Save button to save your settings.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-24-