TP-Link TL-WR1043ND User Manual page 22

The appropriate configuration page will be displayed when an active Internet service is
successfully detected by the router.
 If the connection type detected is Dynamic IP, the next screen will appear as shown
below. Please select to clone the MAC address or not, according to your situation.
 If the connection type is Static IP, the next screen will appear as shown below. Configure
the following parameters and then click Next to continue.
 IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Your ISP will provide you with the IP address you need to enter
here. Enter the IP address into the field.
 Subnet Mask - The Subnet Mask is used for the WAN IP address. Your ISP will
provide you with the subnet mask which is usually 255.255.255.0.
 Default Gateway - Your ISP will provide you with the Gateway address which is the
ISP server's address. Enter the gateway IP address into the box if required.
Primary DNS - Enter the DNS Server IP address into the box if required.

Secondary DNS - If your ISP provides another DNS server, enter it into this field.

TL-WR1043ND 450Mbps Wireless N Gigabit Router
-15-