Usb Settings; Storage Sharing - TP-Link TL-WR1043ND User Manual

5.7

USB Settings

There are five submenus under the USB Settings menu: Storage Sharing, FTP Server, Media
Server, User Accounts and Print Server. Click any of them, and you will be able to configure
the corresponding function.
5.7.1

Storage Sharing

Choose menu "Advanced→ USB Settings→Storage Sharing", and then you can configure a
USB disk drive attached to the router on this page as shown below.
 Service status - started or stopped. You can click the Start button to start the Storage
Sharing service and click the Stop button to stop it.
 Volume - The volume name of the USB drive the users have access to.
Capacity - The storage capacity of the USB driver.

Used - The used space of the USB driver.

Free - The available space of the USB driver.

Use% - The percentage of the used space.

 Shared Indicates the shared or non-shared status of the volume. When the volume is
-
shared, you can click the Disable to stop sharing the volume; when volume is non-shared,
you can click the Enable button to share the volume.
Click the Eject Disk button to safely remove the USB storage device that is connected to
USB port. This takes the drive offline. A message will appear on your web browser when
it is safe to detach the USB disk.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-55-