System Tools - TP-Link TL-WR1043ND User Manual

are set up improperly. You should contact your ISP to get DNS server addresses.
LAN Setup
 Address Autoconfiguration Type – RADVD (Router Advertisement Daemon) and
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.

Site Prefix Configuration Type - The type of IPv6 address prefix.

Delegated - Get the IPv6 address prefix from the ISP automatically, and the device will
delegate it to the LAN.

Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your
ISP to get more information before you configure them.

Site Prefix/ Site Prefix Length: - Configure the Site Prefix and Site Prefix Length.
Please contact your ISP before configuration.

LAN IPv6 Address - Display the LAN IPv6 address created by the device.
Click the Save button to save your settings.

5.18 System Tools

Choose menu "System Tools", and you can see the submenus under the main menu: Time
Settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot,
TL-WR1043ND 450Mbps Wireless N Gigabit Router
-105-