Wireless Statistics; Guest Network - TP-Link TL-WR841N User Manual

Chapter4 Configure
DTIM lnterval value. Vou can specify the value between 1-255 Beacon lntervals. The
default value is 1, which indicates the DTIM lnterval is the same as Beacon lnterval.
• Enable WMM -WMM function can guarantee the packets with high-priority messages
being transmitted preferentially. lt is strongly recommended to enable this function.
• Enable Short GI - lt is recommended to enable this function, for it will increase the
data capacity by reducing the guard interval time.
• Enable AP Isolation - This function isolates all connected wireless stations so that
wireless stations cannot access each other through WLAN. This function will be
disabled ifWDS /Bridge is enabled.
4. 4. 5. Wireless Statistics
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Wireless
>
Wireless Statistics to check the data packets sent and received by
each client device connected to the router.
Wireless Statistics
Current Connected \Nireless StaHons numbers:
1 (
Refresh
J
1 D MAC Address
00-51-62-27-C0-42
Current Status
WPA2-PSK
Received Pac kets
65
Sent Packets
33
• MAC Address - The MAC address of the connected wireless client.
Configure
~ Y:::]
• Current Status - The running status of the connected wireless client.
• Received Packets - Packets received by the wireless client.
• Sent Packets - Packets sent by the wireless client.
• Configure - The button is used for loading the item to the Wireless MAC Filtering list.
4. 5.
Allow - If the Wireless MAC Filtering function is enabled, click this button to
allow the client to access your network.
Deny - If the Wireless MAC Filtering function is enabled, click this button to
deny the client to access your network.
Guest Network
Guest Network allows you to provide Wi-Fi access for guests without disclosing your
host network. When you have guests in your house, apartment, or workplace, you can
create a guest network for them. ln addition, you can customize guest network settings
to en sure network security and privacy.
33