Chapter 4
•
WAN Connection
4. 15. 3. IPv6 LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
IPv6
>
IPv6 LAN
•
Address Auto-Configuration Type
the computers in your LAN. RADVD and DHCPv6 Server are provided.
•
Site Prefix Configuration Type
•
Delegated
device will delegate it to the LAN.
•
Static
- Configure the
contact your ISP to get more information before you configure them.
Note:
If your IPv6 wan connection type is "Tunnel 6to4", the Site Prefix Configuration Type should be "Static" to make
sure "Tunnel 6to4" works properly.
4. 16. System Tools
4. 16. 1. Time Settings
This page allows you to set the time manually or to configure automatic time
synchronization. The router can automatically update the time from an NTP server via
the internet.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
- Display the available wan connection.
and configure the IPv6 LAN settings as needed.
- Select a type to assign IPv6 addresses to
- The type of IPv6 address prefix.
- Get the IPv6 address prefix from the ISP automatically, and the
Site Prefix
Configure the Router in Wireless Router Mode
and
Site Prefix Length
manually. Please
62