Attaching The Handstrap - Symbol PPT 2800 series Product Reference Manual

PPT 2800 Series Product Reference Guide

Attaching the Handstrap

The PPT 2800 has an optional handstrap which increases comfort when holding the
terminal for extended periods of time. To attach the handstrap to the back of the terminal:
1. Thread the round metal piece through the metal handstrap connector on the back
of the terminal.
2. Slide the flat metal piece into the handstrap connection on the bottom of the
terminal.
3. Adjust the velcro strap to fit your hand.
To attach the handstrap for the PPT 2837:
1-14
Figure 1-13. Attaching the Handstrap
1.Put the side slots of the threaded button over the wire
clips on the handstrap.
2.Screw the button into the threaded slot on the back of
the terminal.
3.Slide the flat metal piece into the handstrap connection
on the bottom of the terminal.
Thread round metal
piece through this
connector
Slide flat metal piece up
and into this connector