Table of Contents
Advertisement
E33-10
OPTIONAL HEARTH TRIM INSTALLATION- LOW PROFILE
OPTIONAL HEARTH TRIM INSTALLATION- LOW PROFILE
1.
If you do not have spacer, remove the spacer brackets from the heart trim by removing 3
screws per side. Refer to diagrams 1 and 2 below.
Diagram 1-Top View
Diagram 2-Front View
2.
Attach hearth trim to the unit with 3 screws as shown in the picture below.
919-582
Spacer Brackets
Front
Hearth Trim Front Part without Spacer Brackets
NOTE: Final Installation includes Rear brackets
as shown in the picture above.
installation
Final Install
E33-10 FPI Direct Vent Gas Insert
|
29
06.02.2015
|
29
Advertisement
Table of Contents
