installation
|
25
E33-10
OPTIONAL VIGNETTE INLAY INSTALLATION
OPTIONAL VIGNETTE INLAY INSTALLATION
1. Remove 5 screws from the backside of the Vignette frame cover
2. Take the mesh screen out of the Vignette front frame as shown
and keep them aside (3 at bottom and 2 at top).
below.
Vignette Frame
Vignette Frame Cover
3. Place the Inlay on the Front Trim Assembly.
4. Center the inlay inside the Front Trim Assembly
|
25
E33-10 FPI Direct Vent Gas Insert
919-576
06.26.15