Table of Contents
Advertisement
INSTALLATION
Note: A mantel defl ector may be installed to reduce the minimum mantel height.
Refer to minimum clearances in the installation manual.
If not installing the mantel defl ector - proceed to step 3.
1. Line up the mantel defl ector (tabs to the back) with the full screen frame
as shown below.
2. Bend all 3 tabs 90º to secure the defl ector to the top of the frame
. The tabs should be fl ush with the underside of the top lip of the back plate.
Top of backing
plate
3. Secure the regular faceplate to the unit by securing with 4 screws in
locations shown below.
36
919-197
L390E / HZI390E / L540E / HZI540E
REGULAR FACEPLATE INSTALLATION
REGULAR FACEPLATE INSTALLATION
Back of
Faceplate
4. Install lower trim piece oriented as shown below.
Trim
Final Install
1
L540E-2 / HZI540E-2 Direct Vent Gas Insert
10/29/12
Hide quick links:
Advertisement
Table of Contents
