installation
|
26
OPTIONAL VIGNETTE INLAY INSTALLATION
1. Remove 5 screws from the backside of the Vignette frame cover
and keep them aside (3 at bottom and 2 at top).
Vignette Frame
Vignette Frame Cover
2. Take the mesh screen out of the Vignette front frame as shown
below.
26 |
E33-10 FPI Direct Vent Gas Insert
919-576
OPTIONAL VIGNETTE INLAY INSTALLATION
3. Place the Inlay on the Front Trim Assembly.
4. Center the inlay inside the Front Trim Assembly
11.10.15