Setting Functions By Remote Control - Mitel MiVoice 5361 User Manual

Supplementary features
Hotline (for external users):
Note:
Unlike the hotline feature (see chapter "Hotline", page
with a specifically configured Mitel Alarm Server.

Setting functions by remote control

This section explains how you can alter your phone's settings even if you are not
directly at your phone.
You are not at your desk and want to set various functions on your phone from a different
phone.
You can activate/deactivate many of your phone's functions by remote control from a dif-
ferent phone.
The remote control is initiated using a special function code. You can then enter the func-
tion commands and function codes.
<Function code>
68
User needs help:
User presses the alarm button or directly dials the hotline destination
number.
The connection with the Hotline number is set up.
➔
Using remote control from a third-party phone:
1. Enter function code #06.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the function code for activating/deactivating the function you
want.
Pick up the handset.
You hear the acknowledgement tone.
➔
Put the handset on-hook.
➔ The function is activated/deactivated.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter "Changing the PIN", page 76 or use the function
code *47 (see User Guide Function Codes on the
you have forgotten your PIN, your system administrator can reset it to the
default setting.
64
) hotline alarm can only be used
Mitel
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015
DocFinder). If