Mitel MiVoice 5361 User Manual page 61

MCID
MCID
Activating personal call routing
You wan to specify which of your phone shall ring when you receive a call.
If your system administrator has set up a phone number with several phones for you as
well as the five call routings (One-number user concept, see chapter "Purpose and func-
tion", page 7), you can specify which of your phones shall signal a call by using the per-
sonal call routing. Your system administrator can set up up to 5 call routings. You can only
answer a call on phone where the call is signalled. Contact your system administrator for
more information.
You can activate a call routing for all phones. If you have not configured a call routing, the
default setting (all phones are ringing) is used as standard.
This function can also be stored under a configurable key (see chapter "Configuring
keys", page 83).
Menu
Settings
General
Pers. call routing
<Call routing>
Reset
<Call routing>
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015
During a call:
Press the function key for MCID.
After the call do not hang up: press the function key for
hear the busy tone.
Activating personal call routing:
Press Foxmenu > Foxkey Menu.
Scroll to and press the
Settings
Scroll to and press the
General
Scroll to
Personal call routing
You are prompted to enter your PIN.
➔
Select the required routing and confirm with the
Personal call routing is activated.
➔
To deactivate personal call routing:
Using >
Menu Activated features
sonal call routing.
Renaming personal call routing:
Press >
Menu Settings
Foxkey.
Select
Foxkey.
Select
and press the
> you can deactivate the
Reset
> >
General Personal call routing
Supplementary features
while you
MCID
Foxkey.
Modify
Foxkey.
Ok
> Modify.
Per-
61