Mitel MiVoice 5361 User Manual page 57

Activating/deactivating DTMF mode
You want to be able to use your phone to control other equipment or to access certain
services, such as remote polling of an answering machine or telebanking. For these ser-
vices you need the DTMF mode.
In the DTMF mode each keystroke generates a tone. If for example you enter a call num-
ber during a call, your call partner will hear the tone signals.
You can specify whether the DTMF mode should be generally activated or deactivated
(see Chapter "Configuring the DTMF mode", page 75). DTMF is activated as the default
dialling mode.
If the DTMF mode is generally deactivated, you can activate it and deactivate it again
temporarily during a call.
DTMF
Reset
Making a call on a third-party phone
You want to make a call on a third-party phone using your personal settings, for example
on a colleague's phone or in a meeting room.
You can activate a third-party phone to make an internal or external call using your per-
sonal settings, even if the phone is locked for external calls.
You can activate the phone for a business or private call.
Once you have activated the phone using a function code and your PIN, dialling by your
private phone book is available.
The called party's display shows your personal phone number and not the number of the
phone from which you are making your call.
Any call charges incurred will be charged to you.
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015
You're in a call and the DTMF mode is generally deactivated. You
want to activate the DTMF mode temporarily:
Press Foxmenu > Foxkey DTMF.
The display shows
➔
characters.
Resetting DTMF mode:
Press Foxmenu > Foxkey Reset.
Note:
When you hang up, the DTMF mode is automatically deactivated again.
DTMF. You can now enter the DTMF
Enter number
Supplementary features
57