Mitel MiVoice 5361 User Manual page 37

Starting an announcement
You want to address internal users directly via their loudspeaker – where available –,
without waiting for a reply (similar principle to that of an intercom system).
Requirement: It is essential that the internal user has not barred his phone against
announcement (for configuration see the chapter "Activating protection against call
types", page 78).
Notes:
• Intercom (duplex mode) is a special form of announcement whereby the phone of the
called user immediately transforms your announcement into an internal connection.
Depending on the system configuration your call party can answer your announcement
directly in intercom, without having to press a key. Contact your system administrator
for more information.
• If the called user has several phones in the one number user concept with activated
hands-free, any phone (the quickest) answers the call.
Announcement
<Destination>
<Phone number>
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015
Pick up the handset.
Press Foxmenu > Foxkey Announcement.
Select destination (User
Enter the phone number and confirm with the
User is made aware of the announcement. You can now talk.
➔
Note:
You can also search in the phone book, last-number redial list or call list
for the phone number of the person you are looking for.
Or
You can also start the announcement using
> User/Group.
Announcement
or Group) and confirm with the
Supplementary features
Foxkey.
Ok
Foxkey.
Ok
>
Menu Call features
>
37