Maintenance
Follow the steps below to initialize the counter.
1.
Turn on the machine power. Refer to
2.
Enter System Administration Mode. Refer to
for more information.
3.
Press the
and
4.
Press the OK button.
Note
To return to the Tools screen, press the Clear All button. To return to the previous screen,
press the Back or s button.
Select Maintenance from the System Settings screen.
5.
6.
Press the OK button
7.
Enter the passcode 950807 on the Maintenance screen using the numeric keypad.
8.
Press the Start button.
12-10
Power Source
buttons to select. System Settings on the Tools screen.
Start button
on page 3-7.
Entering System Administration Mode
®
Xerox
WorkCentre
on page 9-1
®
5022/5024 Multifunction Printer
User Guide