Xerox WorkCentre 5022 User Manual page 18

Before Using the Machine
• Do not place any object on the power cord.
• Always keep the plug connection free of dust. A dusty or damp environment may cause a minute
electric current in a connector. It may generate heat and eventually cause a fire.
• To avoid the risk of electric shock and fire, use only the power cord supplied with this product or a
cord designated by Xerox.
The power cord is for use with this product exclusively. Do not use it with any other product.
Do not damage or alter the power cord. Damage and alteration may generate heat and
eventually cause electric shock or fire.
If the power cord is damaged or insulated wires are exposed, contact your local Xerox representative
for a replacement. Do not use a damaged or uninsulated cord to avoid the risk of electric shock and
fire.
CAUTIONS:
• When cleaning this product, always switch off and unplug it. Access to a live machine interior may
cause electric shock.
• Do not plug in or unplug this product with the switch in the On position. Plugging and unplugging
a live connector may deform the plug and generate heat, and eventually cause a fire.
• Hold the plug, not the cord, when unplugging this product, or it may damage the cord and cause
electric shock or fire.
• Always switch off and unplug the machine when it (i.e., fax function) is not used over weekends or
long holidays. Failure to do so may cause deterioration of the insulation and eventually electric
shock or fire.
Note The machine cannot receive fax messages when the power is off.
• Once a month, switch off this product and check the following:
- the power cord is plugged firmly into an electrical outlet
- the plug is not excessively heated, rusted or bent
- the plug and electrical outlet are free of dust
- the power cord is not cracked or worn down
If you notice any unusual condition, switch off and unplug this product first and contact your local
Xerox representative.
1-6 ® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide