Using Quick-Buttons - Xerox WorkCentre 5022 User Manual

Product Overview

Using Quick-Buttons

Quick-Buttons give direct access to the settings screen where you can check the current settings and
make changes.
1. Hold down a Quick-Button or press it repeatedly to scroll through the options.
The screen shows the icons for the selected mode and available selections. (See example below.)
Copy
Paper Supply...
Reduce/Enlarge...
Pages per Side...
2. When the value you want is highlighted, release the Quick-Button.
After two seconds, the setting screen exits and the last item selected is applied.
A new setting is applied when:
• 2 seconds has passed after pressing the Quick-Button and the setting screen exits.
• Another Quick-Button is pressed.
• The Start button is pressed. In this case, a job, such as copying in Copy mode, proceeds.
• In Scan mode, when the Address Book button is pressed. You can also change the address by
pressing the button continuously.
Note The setting screen exits 2 seconds after a Quick-Button is released and the selected setting is
applied.
3-14
Quick-Buttons
111
1
icons
Auto
Auto
available selections
Off
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide