Edge Erase; Maximum Attachment Size; Recipient Confirmation - Xerox WorkCentre 5022 User Manual

Tools
You can select Soften +2, Soften +1, Normal, Sharpen +1, or Sharpen +2.
Normal sets the sharpness at the standard level; Soften +2 sets it lower; Sharpen +2 sets it higher.
Normal is set at the time of factory shipment.
For more information, refer to Copy Settings :
Sharpness on page 9-30.

Edge Erase

Sets the default value displayed for Edge Erase. Setting a value for this menu item erases the black
shadows created around the edges of the paper when scanning with the document cover open.
You can set values between 0 and 10 mm (in 1 mm increments).
2 mm is set at the time of factory shipment.
For more information, refer to Default Settings > ID Card Copy > Edge Erase on page 9-10.
For more information, refer to Default Settings > Fax > Edge Erase on page 9-13

Maximum Attachment Size

Sets the maximum file size for an e-mail attachment.
You can set values between 2 and 20 MB (in 1 MB increments).
20 MB is set at the time of factory shipment.

Recipient Confirmation

Sets whether to confirm the recipient information before sending data.
You can select On or Off.
Off is set at the time of factory shipment.
® ® 9-33
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide