When A Message Is Displayed - Ricoh MP 2001 Operating Instructions Manual

5. Troubleshooting
Problem
An error message remains,
even if misfed paper is
removed.
You forgot the administrator
code.

When a Message Is Displayed

The following chart contains explanations for common messages. If other messages appear, follow the
instructions as they are displayed.
Message
"Cannot detect original size"
"Check original orientation."
"Check paper size."
"Rotate Sort is unavailable with
this paper size."
96
Causes
When a misfeed message
appears, it remains until you
open and close the cover,
as required.
–
Causes
Improper original is placed. See
page 35 "Sizes difficult to
detect".
Original is not placed.
Original is not placed in the
proper orientation.
Improper paper size is set.
A size of paper for which Rotate
Sort is not available is selected.
Solutions
Clear misfed paper, and then open and
close the front cover. See page 110
"Clearing Misfeeds".
Contact your service representative.
Solutions
Select paper manually, not with
the Auto Paper Select function,
and do not use the Auto
Reduce/Enlarge function.
Input the both horizontal and
vertical sizes of the non-
standard original.
Place the original on the
exposure glass. See page 37
"Placing Originals on the
Exposure Glass".
Place your originals.
Change original orientation.
If you press the [Start] key, copy
will start onto the selected
paper.
Select a proper paper size. See
page 60 "Sort".