Hmc Capacity On Demand Order Selection Panel; Enter Cod Enablement Code (Hmc Window) - IBM p5 590 System Handbook

Figure 4-1 HMC Capacity on Demand Order Selection panel
Once the order is placed, an encrypted key is sent to the client by mail and is
available for retrieval from the Web. This key is entered into the system using the
hardware management console, which activates the desired number of
additional processors or memory resources, as seen in Figure 4-2. There is no
requirement to set up electronic monitoring of your configuration by IBM except
for the On/Off Cod offering that requires a usage report.
Figure 4-2 Enter CoD Enablement Code (HMC window)
To order any of the CoD permanent or temporary activation offerings, see your
IBM representative. Feature codes for these activation offerings are summarized
4.11, "Capacity on Demand feature codes" on page 108.
IBM Eserver p5 590 and 595 System Handbook
92