Date And Time Settings - IBM p5 590 System Handbook

remote machines you must decide which is the correct time zone for your
environment.
Figure 8-7 Date and Time settings
The Guided Setup Wizard - Change hscroot password screen is now displayed
as shown in (Figure 8-8). Enter the current hscroot password (normally this
should be the default password of abc123) and then the new password you want.
Note: There are specific restrictions regarding acceptable characters used in
passwords on the HMC. For example, characters must be standard 7-bit
ASCII. For more information, click on the Help button at the bottom of the HMC
dialog.
Chapter 8. Hardware Management Console overview
211