P5-595 Minimum System Configuration - IBM p5 590 System Handbook

Quantity Component description
Two System service processors
One Multiplexer Card
Two RIO-2 Loop Adapters, Single Loop
One I/O drawer
Note: requires 4U frame space
One Remote I/O (RIO) Cable, 0.6 M
Note: used to connect drawer
halves
Two Remote I/O (RIO) Cables, 2.5 M
Two 15,000 rpm Ultra3 SCSI Disk Drive
Assemblies
One I/O Drawer Attachment Cable
Group
One Slim Line or Acoustic Door Kit
Two Bulk Power Regulators
Two Bulk Power Controller Assemblies
Two Bulk Power Distribution Assemblies
Two Line Cords
One Language Specify
Table 5-2 identifies the components required to construct a minimum
configuration for a p5-595 includes the following items:
Table 5-2 p5-595 minimum system configuration
Quantity Component description
IBM Sserver p5 595
One
One 16-way, POWER5 Processor Book,
0-way Active
Feature code (FC)
FC 7811
FC 7812
FC 7818
FC 5791 or FC 5794
FC 7924
FC 3168
FC 3277 or FC 3278
FC 6122
FC 6251 or FC 6252
FC 6186
FC 7803
FC 7837
FC 86xx
Refer to the Sales Manual for
specific line cord feature code
options
FC 9xxx
Refer to the Sales Manual for
specific language feature code
options
Feature code (FC)
9119-595
FC 7813 or FC 7988
Chapter 5. Configuration tools and rules
119