Rear Wheel Removal/Disassembly; Rear Wheel Inspection - Honda 1988 Z50R Service Manual

REAR WHEEL
REM OVA L/DISASSEMBLY
Raise the rear wheel off the ground by placing a box or work -
stand under the engine .
Remove the brake adjusting nut.
Loosen the drive chain adjusting nUlS, push the wheel forward and
derail the drive chain.
loosen the axle nut, withdraw the axle and remove the rear wheel.
Remove t he side collar.
Remove the nuts and the sprocket .
INSPECTION
Place the rear axle in V-blocks and measure the runout .
SERVICE LIMITE : 0 .20 mm (0,008 in)
Check the rim runout by placing the wheel on a truing st and.
Turn the wheel by hand and measure the runout using a dial in -
dicator.
SERVICE LIMITS :
Radial: 2 .0 mm (0.08 in )
Axial : 2 .0 mm (0.08 in)
REAR WHEEL/ BRAKE/ SUSPENSION
12-3