Clutch Inspection - Honda 1988 Z50R Service Manual

Remove the set ring by holding the clutch plate with the
special tool.
TOOL :
Clutch dislBssembling tool
07960-0110000
Remove the clutch plates and discs, clutch center and drive
gear outer.
Remove the drive plate and clutch springs.
INSPECTION
Measure the spring free length.
SERVICE LIMIT : 19.4 mm (0.76 in )
Measure the clutch discs if they show signs of scoring of
discoloration.
Measure the disc thickness.
SERVICE LIMIT : 3.15 mm 10.124 in )
CLUTCH / GEARSHI FT LlNKAG E
SET
8-5