Gearshift Linkage Installation - Honda 1988 Z50R Service Manual

CLUTCH / GEARSHIFT LINKAGE
INSTALLATION
Install the dowel pins and drum pins into the shift drum.
Install the stopper plate, aligning the holes in the stopper plate
with the drum pins.
Install the stopper plate bolt.
Install the gearshift spindle. aligning the return spring with the
pin bolt as shown.
Install t he gearshift pedal.
Install the stopper arm bolt and spring with the bolt.
TIghten the bolt to the specified tOl'que.
TORQUE : 12 N -m 11 . 2 kg -m , 9 ft-Ibl
Install the primary driven gear with the snapring.
Install the clu t ch (page 8-8).
8-12