Shock Absorbers Removal/Disassembly - Honda 1988 Z50R Service Manual

REAR WHEEL/ BRAKE/ SUSPENSION
Install the felt seal on the brake panel and apply oil to
it.
Install the wear indicator plate on the cam, aligning its wide tooth
with the cam's wide groove.
InSlall the brake arm, aligning the punch marks on the arm and
cam, and tighten the brake arm boh.
TORQUE : 6N-m (0.6 kg -m . 4.::J ft -Ib)
Install the brake shoes and spring.
Install the fear wheel Ipage 12-5) and check the brake operation.
SHOCK ABSORBERS
REMO VAL/DISASSEMBLY
Remove the seat and rear cover Ipage 4-3).
Remove the upper and lower nuts and remove the shock absorber.
NOTE
If you remove both shock absorbers, loosen the swingarm pivot
bolt to prevent swingarrn bushing damage.
12-8
T SEAL
PUNCH MARK
BRAKE ARM
SPRING
BRAKE SHOES