Engine Removal Procedure - Honda 1988 Z50R Service Manual

ENGINE REMOVAL/ INSTALLATION
ENGINE REMOVAL
Drain the engine oil (page 2-2).
Remove the shift pedal and left crankcase cover.
Disconnect the alternator wire connector.
Turn the fuel valve OFF and disconnect the fuel tube from t he
carburetor.
Remove the carburetor top and t he air cleaner case mounting bolt.
Remove the intake pipe bolts, then remove the intake pipe, car-
buretor and air cleaner housing together.
Remove the following:
seat and rear cover (page 4-3)
- exhaust pipe joint nuts. mounting bolt and nut, and exhaust
pipe.
- kickstarter.
Loosen the rear axle nut and chain adjuster.
Remove the brake adjust ing nut.
Remove the set plate bolts, set plate and drive sprocket.
5-2
BOLT
•