3.5 Axial play for shafts running in plain bearings
Fig. 11: Axial play for shafts running in plain bearings
①
②
③
(1) - Plain bearing shell
(2) - Shaft
Shafts (2) running in plain bearing shells (1) are axially adjusted when the
lever (3) and the adjusting ring (4) touch the front face of the bearing
shells (1).
When adjusting components mounted on shafts running in plain bearings,
always ensure that the axial play of these shafts is as small as possible,
or 0.
18
Basic Principles of Working with the Machine
④
(3) - Lever
(4) - Adjusting ring
Service Instructions 969 - 01.0 - 12/2015