Basic Settings - AT&T SB67020 User Manual

Synapse SB67020 Deskset User's Guide

Basic Settings

The remaining procedures in this chapter assume that you are already logged in to the
WebUI. See
After logging in, the Basic Settings page appears as shown in Figure 38. Your
Extension Name, which the system administrator enters, is displayed on internal calls.
In Call Appearance mode, callers using the Auto Attendant can search for your Extension
Name to reach your extension.
In Line Appearance mode, only the Set Password setting is available.
To modify the Basic Settings:
1. Set the Call Forward All Settings. When on, Call Forward All forwards calls to the
target you select, and your Deskset does not ring.
a.
b. Select the Target Type.
Web Interface
"Accessing the Web User Interface (WebUI)" on page 123
Figure 38. WebUI Basic Settings (Call Appearance mode shown)
Turn Call Forwarding Off or On.
Voicemail: Select either Personal or, if your system has Group

Mailboxes, one of the Group Mailboxes.
125
Back to Contents
.