Download Print this page

HP 9304m Installation And Getting Started Manual page 79

Procurve routing switches

Hide thumbs Also See for 9304m:

Table of Contents

Installation and Getting Started Guide

Select the Switch-over Active Module link. A message appears asking you to verify that you want to switch

over from the active module to the standby.

Select Yes to switch over or No to cancel the switchover request.

If you are connecting directly to a management device (such as a PC), use a Cat-5 crossover cable.

If you are connecting to a hub or switch, use a Cat-5 straight-though cable.

Once a link is established, the LED on the PCMCIA slot will light up.