Installation and Getting Started Guide
•
auth – security/authorization messages
•
syslog – messages generated internally by syslogd
•
lpr – line printer subsystem
•
news – netnews subsystem
•
uucp – uucp subsystem
•
sys9 – cron/at subsystem
•
sys10 – reserved for system use
•
sys11 – reserved for system use
•
sys12 – reserved for system use
•
sys13 – reserved for system use
•
sys14 – reserved for system use
•
cron – cron/at subsystem
•
local0 – reserved for local use
•
local1 – reserved for local use
•
local2 – reserved for local use
•
local3 – reserved for local use
•
local4 – reserved for local use
•
local5 – reserved for local use
•
local6 – reserved for local use
•
local7 – reserved for local use
Clearing the Syslog Messages from the Local Buffer
To clear the Syslog messages stored in the HP device's local buffer, enter the following command from the
Privileged EXEC level the CLI:
HP9300# clear logging
Syntax: clear logging
USING THE WEB MANAGEMENT INTERFACE
To clear Syslog messages using the Web management interface, use the following procedure:
1.
Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2.
Click on the plus sign next to Command in the tree view to display the command options.
3.
Select the Clear link to display the Clear panel.
4.
Click on the checkbox next to System Logging to place a checkmark in the box.
5.
Click Apply to clear the log.
Syslog Messages
Table A.2 lists all of the Syslog messages. The messages are listed by message level, in the following order:
•
Emergencies (none)
•
Alerts
•
Critical (none)
A - 10