Displaying Gvrp Statistics - HP 9304m Installation And Getting Started Manual

Installation and Getting Started Guide
Table 8.4: CLI Display of Summary VLAN Information for GVRP (Continued)
This Field...
DEFAULT
BASE-VLAN
Timer to Delete Entry Running
Legend
Forbidden Members
Fixed Members
Normal(Dynamic) Members
MODE
To display detailed information for all VLANs, enter the show gvrp vlan all command.

Displaying GVRP Statistics

To display GVRP statistics for a port, enter a command such as the following:
HP9300(config)# show gvrp statistics ethernet 2/1
PORT 2/1 Statistics:
Leave All Received
Join Empty Received
Join In Received
Leave Empty Received
Leave In Received
Empty Received
Leave All Transmitted
Join Empty Transmitted
Join In Transmitted
Leave Empty Transmitted
Leave In Transmitted
Empty Transmitted
Invalid Messages/Attributes Skipped
Failed Registrations
Syntax: show gvrp statistics all | ethernet <port-num>
8 - 14
Displays...
Whether this is the default VLAN.
Whether this is the base VLAN for GVRP.
Whether all ports have left the VLAN and the timer to delete the VLAN
itself is running. The timer is described in the note for the Leave timer
in "Changing the GVRP Timers" on page 8-7.
The meanings of the letter codes used in other parts of the display.
The ports that cannot become members of a VLAN advertised or
leaned by GVRP.
The ports that are statically configured members of the VLAN. GVRP
cannot remove these ports.
The ports that were added by GVRP. These ports also can be
removed by GVRP.
The type of VLAN, which can be one of the following:
• STATIC – The VLAN is statically configured and cannot be
removed by GVRP. This includes VLANs you have configured as
well as the default VLAN (1), base GVRP VLAN (4093), and
Single STP VLAN (4094).
• DYNAMIC – The VLAN was learned through GVRP.
: 147
: 4193
: 599
: 0
: 0
: 588
: 157
: 1794
: 598
: 0
: 0
: 1248
: 0
: 0