HP 9304m Installation And Getting Started Manual page 51

Installation and Getting Started Guide
appletalk
arp
boot
some lines omitted for brevity...
ipx
lock-address
logging
mac
--More--, next page: Space, next line: Return key, quit: Control-c
The software provides the following scrolling options:
• Press the Space bar to display the next page (one screen at time).
• Press the Return or Enter key to display the next line (one line at a time).
• Press CTRL + C to cancel the display.
Line Editing Commands
The CLI supports the following line editing commands. To enter a line-editing command, use the CTRL-key
combination for the command by pressing and holding the CTRL key, then pressing the letter associated with the
command.
Ctrl-Key Combination
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-D
Ctrl-E
Ctrl-F
Ctrl-K
Ctrl-L; Ctrl-R
Ctrl-N
Ctrl-P
Ctrl-U; Ctrl-X
Ctrl-W
Ctrl-Z
For a complete list of CLI commands and syntax information for each command, see the Command Line Interface
Reference .
2 - 24
Table 2.3: CLI Line Editing Commands
Description
Moves to the first character on the command line.
Moves the cursor back one character.
Escapes and terminates command prompts and ongoing tasks
(such as lengthy displays), and displays a fresh command prompt.
Deletes the character at the cursor.
Moves to the end of the current command line.
Moves the cursor forward one character.
Deletes all characters from the cursor to the end of the command
line.
Repeats the current command line on a new line.
Enters the next command line in the history buffer.
Enters the previous command line in the history buffer.
Deletes all characters from the cursor to the beginning of the
command line.
Deletes the last word you typed.
Moves from any CONFIG level of the CLI to the Privileged EXEC
level; at the Privileged EXEC level, moves to the User EXEC level.